Honeywell 45000 MaxP CPU board set
==================================

BOARD 1: MAXP
Assy No: 51403276-100
HW Revision: A

Loc	Device type	Designation	Revision(s)
U44	GAL22V10B	51120990-100	A
U33	EPC1213		51120991-100	A*
U54	EPC1213		51120992-100	A*
U55	EPC1213		51120993-100	A*
U41	CY7C271A	51121005-100	A(3), D, G(1)
U40	CY7C271A	51121005-101	A(3), D, G(1)
U39	CY7C271A	51121005-102	A(3), D, G(1)
U38	CY7C271A	51121005-103	A(3), D, G(1)
U32	CY7C271A	51121005-104	A(3), D, G(1)
U31	CY7C271A	51121005-105	A(3), D, G(1)
U30	CY7C271A	51121005-106	A(3), D, G(1)
U29	CY7C271A	51121005-107	A(3), D, G(1)
U25	CY7C271A	51121005-108	A(3), D, G(1)
U24	CY7C271A	51121005-109	A(3), D, G(1)
U23	CY7C271A	51121005-110	A(3), D, G(1)
U22	CY7C271A	51121005-111	A(3), D, G(1)


BOARD 2: MPE
Assy No: 51403273-100
HW Revision: A

Loc	Device type	Designation	Revision(s)
U41	27C040		51120986-100	A1
U25	EPC1		51121049	A

-   original version installed on boards
(1) replacement version for PMX5, provided as physical devices by Heinz Janiec
(2) replacement version for PMX5, provided as image files by Burke Baumann
(3) obsolete version, provided as physical devices by Heinz Janiec
* Not imaged, not supported by ELNEC
** Not updated, non-reprogrammable device

In addition to the new PMX5 firmware (G/C), a jumper is needed between pins
6 and 26 of connector J6 on the MPE board.